Showing posts with label Mini Cooper. Show all posts
Showing posts with label Mini Cooper. Show all posts

Monday, December 27, 2010

Mini Cooper S, 1968

Mini Cooper S, 1968

 


The Mini is a small car that was produced by the British Motor Corporation (BMC) and its successors from 1959 to 2000. The most popular British-made car, it has since been replaced by the New MINI which was launched in 2001. The original is considered an icon of the 1960s, and its space-saving front-wheel-drive layout influenced a generation of car-makers. In the international poll for the award of the world's most influential car of the twentieth century the Mini came second after the Ford Model T.

The revolutionary and distinctive two-door car was designed for BMC by Sir Alec Issigonis (1906–88). It was manufactured at the Longbridge and Cowley plants in the United Kingdom, and later in Australia, Belgium, Chile, Italy, Portugal, South Africa, Spain, Uruguay, Venezuela and Yugoslavia. The Mini Mk I had three major updates: The Mk II, the Clubman, and the Mk III, within which were a series of variations including an estate car, a pickup truck, a van, and the Mini Moke — a jeep-like buggy. The Mini Cooper and Cooper "S" were sportier versions that were successful as rally cars — winning the Monte Carlo Rally three times.

Design and development

Designed as project ADO15 (Austin Drawing Office project number 15), the Mini came about because of a fuel crisis. In 1956 as a result of the Suez Crisis, which reduced oil supplies, the United Kingdom saw the re-introduction of petrol rationing. Sales of large cars slumped, and there was a boom in the market for so called bubble cars, which were mainly German in origin. Leonard Lord, the somewhat autocratic head of BMC, decreed that something had to be done and quickly. He laid down some basic design requirements: the car should be contained within a box that measured 10 × 4 × 4 feet (3 × 1.2 × 1.2 m); and the passenger accommodation should occupy six feet (1.8 m) of the 10 foot (3 m) length; and the engine, for reasons of cost, should be an existing unit. Issigonis, who had been working for Alvis, had been recruited back to BMC in 1955 and, with his skills in designing small cars, was a natural for the task. The team that designed the Mini was remarkably small; as well as Issigonis, there was Jack Daniels, who had worked with him on the Morris Minor, Chris Kingham, who had been with him at Alvis, two engineering students and four draughtsmen. Together, by October 1957 they had designed and built the original prototype, which was affectionately named 'The Orange Box' because of its colour.

The ADO15 used a conventional BMC A-Series four-cylinder water-cooled engine, but departed from tradition by having it mounted transversely, placing the engine oil lubricated, four-speed transmission in the sump, and by employing front-wheel drive. Almost all small front-wheel-drive cars developed since the 1970s have used a similar configuration. The radiator was mounted at the left side of the car so that the engine-mounted fan could be retained, but with reversed pitch so it blew air into the natural low pressure area under the front wing. This location saved precious vehicle length, but had the disadvantage of feeding the radiator with air that had been heated by passing over the engine.

The suspension system, designed by Alex Moulton at Moulton Developments Limited, used compact rubber cones instead of conventional springs — this led to a rather raw and bumpy ride, but this rigidity, together with the wheels being pushed out to the corners of the car, gave the car its famous go kart-like handling. It was initially planned to use an interconnected fluid system, similar to the one which Issigonis and Moulton were working on in the mid-1950s at Alvis, but the short development time of the car meant this would not be ready in time for the launch. The system intended for the Mini was further developed to become the hydrolastic system and was first used on the Austin 1100 (launched in 1962). Ten-inch wheels were specified, so new tyres needed to be developed — with the initial contract going to Dunlop.

The car was designed with sliding windows in the doors, thus allowing for storage pockets to be fitted in the space where a winding window mechanism would have been. Issigonis is said to have sized the resulting storage bins to take a bottle of his favourite Gordon's Gin. The boot lid was designed with the hinges at the bottom so that the car could be driven with it open to increase luggage space. On early cars the number plate was hinged so it dropped down to remain visible when the boot lid was open.

To keep manual labour costs low, the car was designed with quirky welded seams that are visible on the outside of the car running down the A and C pillars and between the body and the floor pan. To further simplify construction, the car had external door and boot hinges.
 
The Mini Cooper and Cooper S – 1961–2000
Issigonis' friend John Cooper, owner of the Cooper Car Company, designer and builder of Formula 1 and rally cars, saw the potential of the Mini. Issigonis was initially reluctant to see the Mini in the role of a performance car - but after John Cooper appealed to BMC management, the two men collaborated to create the Mini Cooper. The Austin Mini Cooper and Morris Mini Cooper debuted in 1961.

The original 848 cc engine from the Morris Mini-Minor was increased to 997 cc, boosting power from 34 bhp to 55 bhp (25 to 41 kW). The car featured a racing-tuned engine, double SU carburettors, close-ratio gearbox and front disc brakes, uncommon at the time in a small car. One thousand units of this iteration were commissioned by management, intended for and designed to meet the homologation rules of Group 2 rally racing. The 997 cc engine was replaced by a shorter stroke 998 cc unit in 1964.

A more powerful Mini Cooper, dubbed the "S", was developed in tandem and released in 1963. Featuring a 1071 cc engine and larger servo-assisted disc brakes, 4,030 Cooper S cars were produced and sold until the model was updated in August 1964. Cooper also produced two models specifically for circuit racing, rated at 970 cc and a 1275 cc, both of which were also offered to the public. The smaller-engine model was not well received, and only 963 were built until the model was discontinued in 1965. The 1275 cc Cooper S models were discontinued in 1971.

The Mini Cooper S earned acclaim with Monte Carlo Rally victories in 1964, 1965, and 1967. Minis were initially placed first, second and third in the 1966 rally as well, but were disqualified after a controversial decision by the French judges. The disqualification related to the use of a variable resistance headlamp dimming circuit in place of a dual-filament lamp. It should be noted that the Citroën DS that was eventually awarded first place had illegal white headlamps but escaped disqualification. The driver of the Citroën, Pauli Toivonen, was reluctant to accept the trophy and vowed that he would never race for Citroën again. BMC probably received more publicity from the disqualification than they would have gained from a victory - but had the Mini not been disqualified, it would have been the only car in history to be placed amongst the Monte Carlo winners for six consecutive years.

In 1971 the Mini Cooper design was licensed in Italy by Innocenti and in 1973 to Spain by Authi (Automoviles de Turismo Hispano-Ingleses), which began to produce the Innocenti Mini Cooper 1300 and the Authi Mini Cooper 1300, respectively.

A new Mini Cooper named the RSP (Rover Special Products) was briefly relaunched in 1990 to 1991, with slightly lower performance than the 1960s Cooper. It proved so popular that the new Cooper-marked Mini went into full production in late 1991. From 1992 Coopers were fitted with a fuel-injected version of the 1275 cc engine, and in 1997 a multi-point fuel injected engine was introduced, along with a front-mounted radiator and various safety improvements.

Thursday, February 25, 2010

Mini John Cooper Works Convertible

Mini John Cooper Works Convertible




MINI John Cooper Works Convertible
Featuring the same high performance engineering modifications as the Hatch model carrying the John Cooper Works badge, the Convertible's 1.6-litre twin scroll-turbocharged engine produces 211 hp and up to 280 Nm peak torque with Overboost deployed.

The newcomer's petrol power plant is a significantly revised version of the 1.6-litre turbocharged unit found in MINI Cooper S models, and the same as that in the MINI Challenge race car. The engine is lighter, stronger and is supplied with a larger air intake and an exhaust system specifically designed for John Cooper Works cars.
The transmission's gearing is strengthened to handle the extra available power; power that pushes the car to a remarkable output of 132 hp per litre, yet still able to offer an amazing 39.8 mpg.
The lengthy standard kit list of every MINI John Cooper Works Convertible includes a bespoke John Cooper Works Alcantara steering wheel, sport seats, John Cooper Works floor mats and glossy piano black interior. Air conditioning is fitted as standard, as it is now on every new MINI.
Performance of the Works car is underlined by an exclusive speedometer, which runs to 160 mph to account for the car's higher top speed than that of any other MINI.

A Sport button is located in front of the gear stick. When pressed it activates a bespoke engine control map producing boost earlier in the rev range and sharpening steering and throttle response. The gear knob featuring a red gearing diagram is unique to the MINI John Cooper Works.
Unique lightweight 17" alloy wheels in Cross-spoke CHALLENGE design, shod with Run-flat tyres, feature on the exciting new Convertible. A John Cooper Works Aero kit is standard and the tuning brand's logo is positioned on the boot, grille, brakes and door sills.

Extra-large disc brakes paired with upgraded bright red Brembo performance callipers are supplied. Chassis technologies ensuring a sporty and safe driving experience are also standard features of the MINI John Cooper Works:
* ABS Brakes
* EBD Electronic Brake Force Distribution
* CBC Cornering Brake Control
* EDLC Electronic Differential Lock Control
* DSC Dynamic Stability Control (incorporating Hill Assist)
* DTC Dynamic Traction Control

Unique to MINI John Cooper Works models is EDLC. With DSC fully deactivated, the car's Electronic Differential Lock Control delivers an even sportier driving experience. EDLC works when the car is accelerating hard out of corners or tight bends. In this situation, it electronically slows the spinning inside wheel to enhance grip and ensure that all available power is transferred to the road through the wheel with greatest traction. In contrast to the way DSC and DTC manage power delivery to the wheels, EDLC does not intervene with the throughput of engine power, meaning the driver is in near total control of the handling of the car.

The MINI John Cooper Works Convertible will be built entirely in the UK
With the new MINI Convertible now rolling off the line, several points of operation at MINI Plant Swindon and Oxford have been modified. BMW Group invested in new assembly stations for the Convertible tailgate at Plant Swindon. At Plant Oxford, the bodyshop installed and commissioned all necessary facilities and infrastructure to meet the high quality standards and geometrical accuracy for the Convertible body.

Associates in final assembly have transformed all work areas to integrate production of the new Convertible efficiently, and are now building the complete MINI model line-up once again on a single assembly line.

Friday, January 1, 2010

Lincoln, First Look: Lincoln C Concept Car Mini Cooper-owner style

Lincoln C Concept Car Mini Cooper-owner style
BMW has proven that rear-wheel-drive c-segment size luxury works, with its 1 Series, Lincoln is turning next to the 2011 Ford Focus' platform for post-global warming luxury. To prepare us for a CAFE-friendly world, Lincoln rolled out the C concept (for c-segment, and so far, without an "MK" prefix) at Detroit. Looking much like a Renault with Lincoln's "flying wing" '41 Continental retro cue grille, the C is about the length of the '11 Focus, but about 2.75-inches wider for three-abreast seating via two flat benches. Ford designers cite the '39 Lincoln, '56 Continental II and '61 Continental as inspiration. But the a-pillar is curved much like a Renault Espace's, and the c-pillar ends in a Clio-esque bustle trunk. While there's no tumblehome, a deep shoulderline accents the profile.

Lincoln C Concept Car Mini Cooper-owner style
The stainless steel-like top is actually aluminum with a metalized paint, and the gray interior wood trim is recycled driftwood veneer. The Lincoln C has more interior space than a '61 Continental, J Mays and Freeman Thomas proudly note. The engine, theoretically - Lincoln didn't open the hood -- is a planned 1.6-liter EcoBoost four with central direct injection, variable valve timing on both cams and an interesting stop/start system to shut down the engine for red lights and stop signs.
Lincoln C Concept Car Mini Cooper-owner style
Restarts use a fraction of the starter energy required for a cold start by injecting and igniting fuel in the cylinder closest to top-dead-center on the compression stroke. The six-speed, twin-clutch "Powershift" transmission uses more efficient dry clutches (Audi DSG's wet clutches require an oil pump). It gains 9-percent better fuel economy than a conventional automatic transmission, Ford says. Including some key weight savings, Ford expects the EcoBoost-powered C would get about 25-percent better fuel economy than a similar car with a 2.0-liter.
Lincoln C Concept Car Mini Cooper-owner style
Other interior features include no b-pillar (which Mays insists is approaching production viability, even if the "suicide door" feature that accompanies it is only for show), a hubless steering wheel rendered in Apple-computer white plastic, thin-seat technology for better interior room (another near-production feature), hand-drawn floral patterns laser-etched into the otherwise stark white leather seats, weight- and height-sensing power head restraints, and stereo speakers in the headliner, which surrounds a Lincoln-symbol glass sunroof.

Lincoln C Concept Car Mini Cooper-owner style
North America design chief Peter Horbury says his favorite feature, though, is a device in the car's grille that recognizes other Lincoln Cs and automatically "winks" the left headlight, Mini Cooper-owner style.
Lincoln C Concept Car Mini Cooper-owner style
Question is, can Lincoln build a c-segment car with so much appeal that owners "wink" or wave at others voluntarily? We may have to ask that question again when Lincoln markets a c-segment car, in as little as two or three years.
Related Posts Plugin for WordPress, Blogger...